--- Log opened Sun Feb 25 00:00:18 2007 00:12 -!- sparc-kly [n=mubex@adsl-72-50-101-246.prtc.net] has joined #t2 01:06 -!- mtr_ [n=Michael@kobz-590cab90.pool.einsundeins.de] has joined #t2 01:16 -!- sparc-kly [n=mubex@adsl-72-50-101-246.prtc.net] has quit [Read error: 54 (Connection reset by peer)] 01:22 -!- mtr [n=Michael@kobz-590cabff.pool.einsundeins.de] has quit [Read error: 113 (No route to host)] 01:22 -!- mtr_ is now known as mtr 01:26 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 02:15 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 02:15 -!- sepp_ [n=sepp@p85.212.57.53.tisdip.tiscali.de] has quit [Read error: 110 (Connection timed out)] 02:16 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 02:40 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 02:41 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 02:59 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 03:00 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 03:16 -!- Stelz [i=stelz@unaffiliated/stelz] has quit [Read error: 145 (Connection timed out)] 03:59 -!- idealm_ [n=ideal@203.45.99.98] has joined #t2 04:03 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 04:04 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 04:19 -!- idealm [n=ideal@CPE-203-45-99-98.nsw.bigpond.net.au] has quit [Read error: 110 (Connection timed out)] 04:31 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 04:33 -!- emte [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 05:16 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 60 (Operation timed out)] 05:23 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 06:05 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 06:10 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 07:17 -!- misl [n=chatzill@84-104-172-187.cable.quicknet.nl] has joined #t2 07:37 -!- misl [n=chatzill@84-104-172-187.cable.quicknet.nl] has quit [Read error: 110 (Connection timed out)] 08:27 -!- idealm_ [n=ideal@203.45.99.98] has quit [Remote closed the connection] 08:38 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 08:39 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 09:03 -!- misl [n=chatzill@84-104-172-187.cable.quicknet.nl] has joined #t2 09:04 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 09:06 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 09:29 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 09:31 -!- Stelz [i=stelz@unaffiliated/stelz] has joined #t2 09:31 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 10:36 -!- Stelz [i=stelz@unaffiliated/stelz] has quit ["I wanna live my life like thunder!"] 11:00 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 11:00 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 11:29 < rxr> re 11:42 < CIA-8> rene * r22699 /trunk/package/dictionary/xsteak/xsteak.desc: 11:42 < CIA-8> yokoy : 11:42 < CIA-8> * updated xsteak Url tags 11:43 < CIA-8> rene * r22700 /trunk/package/editors/lyx/lyx.desc: * updated lyx (1.4.3 -> 1.4.4) 11:44 < CIA-8> rene * r22701 /trunk/package/office/gnucash/gnucash.desc: * updated gnucash (2.0.4 -> 2.0.5) 11:44 < CIA-8> rene * r22702 /trunk/package/gnue/gnue-common/gnue-common.desc: * updated gnue-common (0.6.6 -> 0.6.7) 11:45 < CIA-8> rene * r22703 /trunk/package/office/qbankmanager/qbankmanager.desc: * updated qbankmanager (0.9.38 -> 0.9.39) 11:45 < CIA-8> rene * r22704 /trunk/package/gnustep/gworkspace/gworkspace.desc: * updated gworkspace (0.8.4 -> 0.8.5) 11:45 < CIA-8> rene * r22705 /trunk/package/develop/hte/hte.desc: * updated hte (2.0beta2 -> 2.0beta3) 11:46 < CIA-8> rene * r22706 /trunk/package/network/nginx/nginx.desc: * updated nginx (0.5.12 -> 0.5.14) 11:47 < CIA-8> rene * r22707 /trunk/package/security/samhain/samhain.desc: * updated samhain (2.3.1 -> 2.3.2) 11:49 < rxr> ieeek 12:06 < rxr> lol 12:06 < rxr> Initial Design Synopsis for a DragonFlyBSD Filesystem 12:11 < rxr> lol, knopperdisk on distrowatch 12:11 < rxr> "Knopperdisk is a Gentoo-based distribution designed to run from a USB storage device. After exactly one and a half years' development, a new version was just released. One particular among the many changes: "You always had to enter the usb device during the boot so the initrd would know which device to mount which would function as the real root filesystem. Instead of initrd now initramfs is used, and you no longer have to enter the usb device. It's taken care of automatically for you, by scanning all the available SCSI devices, trying to mount them and check whether the knopperdisk image is present or not."" 12:11 < rxr> ^- T2 @Live had this from day one ... 12:12 < rxr> and is used in this style in production use in serveral company products ... 12:12 < rxr> what a joke ... 12:12 -!- nacho_macho [n=dc36734@213.144.157.75] has joined #t2 12:12 < nacho_macho> Hallo 12:15 < rxr> hi nacho_macho 12:17 < nacho_macho> rxr: the last compilation of trunk lead me to a broken installation.. 12:18 < nacho_macho> rxr: dont kno what the reason was, but $PATH of hostsystem was broken.. 12:20 < rxr> what exactly do you mean? 12:20 < rxr> (I can not yet follow :-) 12:20 < nacho_macho> i started Build-Target as usual 12:21 < nacho_macho> after 2 days, i ve seen the compilation was stopped coz of error (sry i dont have any logs) 12:21 < nacho_macho> but my debian systems path was broken (su only) 12:22 < nacho_macho> all i kno is, the compilation has stopped somewhere building libpam or so.. 12:23 < rxr> and now your debian host is "defect" ? 12:23 < nacho_macho> it was 12:23 < nacho_macho> do u think Build-Target would work with fakeroot? 12:24 < CIA-8> rene * r22708 /trunk/package/base/libcap/ (cross.patch libcap.conf): * fixed libcap to cross build 12:24 < rxr> nacho_macho: you cah try :-) 12:24 < rxr> mtr: guess we really should start the CROSS marking ... 12:30 < CIA-8> rene * r22709 /branches/6.0/package/base/uclibc/patches/nvi-syssiglist.patch: * merged r21635 from trunk: updated uclibc/nvi patch 12:36 -!- d-marc [n=d-marc@HSI-KBW-085-216-121-079.hsi.kabelbw.de] has joined #t2 12:36 < rxr> moin d-marc 12:40 < d-marc> hello R4gnar0k 12:40 < d-marc> hello rxr 12:59 < rxr> valentin: I was suprised to find yaboot and the G5 OF loaded some 14MB kernel and 40MB initrd just fine 12:59 < rxr> valentin: accidently built a kernel with debug symbols ... 13:01 < rxr> valentin: ah no, the kernel was 40M and the initramfs just 16M 13:01 < rxr> damn UltraSPARC OF errors out way earlier (at least the last time I needed that) 13:10 -!- nacho_macho [n=dc36734@213.144.157.75] has quit [Remote closed the connection] 13:21 -!- d-marc [n=d-marc@HSI-KBW-085-216-121-079.hsi.kabelbw.de] has left #t2 ["Time makes no sense"] 13:32 < CIA-8> rene * r22710 /trunk/package/base/ (fgetty/fgetty.cache minit/minit.cache uclibc/uclibc.cache): * added fgetty, minit and uclibc .cache files 13:33 < Capey> hmm,wierd linux-header problem 13:33 < rxr> hi Capey 13:34 < Capey> hi rxr 13:34 < Capey> do you want sched.h patch to go under uclibc or linux-header? 13:34 < Capey> editing: 13:34 < Capey> #if 0 /*def __USE_GNU*/ 13:34 < Capey> to 13:34 < Capey> #if __USE_GNU 13:35 < Capey> ups 13:35 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 13:35 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 13:36 < CIA-8> rene * r22711 /trunk/package/powerpc/pmud/pmud.cache: * added pmud.cache 13:53 < rxr> Capey: what do you use as base right now? 13:53 < rxr> Capey: if you use wrt2 from SVN I could compile it in sync so I have an idea what you talk about ;-) 13:58 -!- sparc-kly [n=mubex@adsl-72-50-101-246.prtc.net] has joined #t2 14:02 < rxr> hi sparc-kly 14:03 < CIA-8> rene * r22712 /trunk/package/ (18 files in 18 dirs): * added a bunch of other missing .cache files 14:09 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 14:09 < Capey> rxr: yeah wrt2 from svn 14:09 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 14:09 < Capey> with uClibc 14:14 < rxr> any local modifications ? 14:18 < Capey> few 14:18 < Capey> but only uclibc.conf is important 14:18 < Capey> change coming up: 14:19 < Capey> --- uclibc.conf (revision 22709) 14:19 < Capey> +++ uclibc.conf (working copy) 14:19 < Capey> @@ -79,14 +79,16 @@ echo "X RUNTIME_PREFIX \"/\"" #echo "X DEVEL_PREFIX \"/usr/lib/uclibc\"" # NOTE: why there? echo "X DEVEL_PREFIX \"/usr\"" 14:19 < Capey> + 14:19 < Capey> + echo "X HAVE_SHARED" 14:19 < Capey> this was done to get openssl compile 14:20 < Capey> was a quick hack, and needs some modifications to disable/enable if SDECFG_STATIC is defined 14:23 < rxr> you build for arm, hm ? 14:23 < Capey> mips 14:23 < rxr> the linksys had a MIPS cpu? 14:23 < rxr> big or little endian ? 14:23 < Capey> have to verify, but yes, i think so... 14:23 < Capey> big 14:23 < rxr> and specific CPU optimization you selected ? 14:24 < CIA-8> rene * r22714 /trunk/package/xorg/ (7 files in 7 dirs): * updated sparc specific X.org drivers that formerly contained an ERROR mark 14:25 < Capey> geneic 14:25 < Capey> generic 14:27 < rxr> I think mtr builds uclibc+mips regularly 14:27 < rxr> should be rock solid ... 14:27 < rxr> anyway I started a build, likewise 14:31 -!- emte_ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 14:31 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 14:34 < CIA-8> rene * r22715 /trunk/package/ (7 files in 7 dirs): 14:34 < CIA-8> * updated some packages' .cache files with an reference to the 14:34 < CIA-8> old monolythic xorg 14:39 < rxr> Mr. Ballmer, Show Us the Code 14:39 < rxr> http://showusthecode.com/ 14:46 < rxr> oh, that is quite strict from Alan Cox: 14:46 < rxr> "... You will instead find that both vendors stopping providing Linux related 14:46 < rxr> source code at about the point they got Xbox related contracts. A matter 14:46 < rxr> which has been pointed out to various competition and legal authorities 14:46 < rxr> and for now where it seems to lie. 14:46 < rxr> Fortunately at the moment there is a simple cure - buy Intel hardware. 14:46 < rxr> That also has the advantage that you are more likely to get help because 14:46 < rxr> some of us only look at AMD processor related problems as part of 14:46 < rxr> official work duties nowdays, and plan to do so until AMD (as owner 14:46 < rxr> of ATI) behave." 14:55 < rxr> http://swtch.com/~rsc/regexp/regexp1.html 14:57 < rxr> valentin: -^ 15:15 -!- LMJ [n=serwou@laf31-2-82-224-107-105.fbx.proxad.net] has joined #t2 15:17 < rxr> hi LMJ 15:17 [Users #t2] 15:17 [@ChanServ] [ CIA-8 ] [ LMJ ] [ mtr ] [ rxr ] [ valentin] 15:17 [ Capey ] [ emte__] [ misl] [ R4gnar0k] [ sparc-kly] 15:17 -!- Irssi: #t2: Total of 11 nicks [1 ops, 0 halfops, 0 voices, 10 normal] 15:17 < rxr> Capey: first build error on my side: 15:17 < rxr> 1-uclibc: 15:17 < rxr> STRIP -x -R .note -R .comment ldso/ldso/ld-uClibc_so.a 15:17 < rxr> strip: Unable to recognise the format of the input file `ldso/ldso/ldso.oS' 15:17 < rxr> strip: Unable to recognise the format of the input file `ldso/ldso/mips/resolve.oS' 15:17 < LMJ> moin rxr 15:22 -!- nacho_macho2 [n=dc36734@213.144.157.75] has joined #t2 15:22 < nacho_macho2> re 15:23 < nacho_macho2> 2 questions: is there a way to resume a compilation and how can i remove an installed package? 15:23 < rxr> resume a target build or single package? 15:23 < rxr> for a target just re-run Build-Target it will continue where it failed 15:23 < rxr> a single package, no 15:24 < rxr> only if you want to debug it, then cd src.$pkg.$UUID... ; ./debug.sh ... 15:24 < nacho_macho2> ok 15:24 < rxr> install an in-package system use the mine tool (yes this is a legacy thing and we will soon have something else) 15:24 < nacho_macho2> how about removin an installed package? (after successfull compilation) 15:24 < rxr> mine -r $pkg 15:24 < nacho_macho2> ok 15:25 < rxr> Capey: what did you do with embutils given that it does not build with uclibc ? 15:26 < CIA-8> rene * r22716 /trunk/package/base/uclibc/uclibc.conf: 15:26 < CIA-8> * fixed uclibc to compile in CROSS mode when it is a non-native 15:26 < CIA-8> build stage (we do not need SDECFG_CROSSBUILD to know that) 15:28 < CIA-8> rene * r22717 /trunk/package/base/pkgconfig/pkgconfig.conf: * fixed pkgconfig to not depend on SDECFG_CROSSBUILD, likewise 15:33 < Capey> rxr: i didnt get 1-uclibc error 15:33 < Capey> rxr: sorry, i'm using busybox and not the embutils 15:35 < rxr> Capey: the question is how do we want to proceed this this 15:35 < rxr> currently the wrt2 is mostly a copy of an (very) old embedded target 15:35 < rxr> I think we can safely convert it to a static package selectin in the usual pkgsel format 15:37 < Capey> yep 15:37 < rxr> will you do the conversion ? 15:40 < CIA-8> rene * r22718 /trunk/package/security/openssl/openssl.desc: * updated openssl (0.9.8d -> 0.9.8e) 15:43 < CIA-8> rene * r22719 /branches/6.0/package/security/openssl/openssl.desc: * merged r22718 from trunk: * updated openssl (0.9.8d -> 0.9.8e) 15:44 < rxr> ok - after the uclibc fix the next one that fails is: quagga 15:44 < rxr> which package did you encounter problems with ? 15:45 < Capey> so far, known fails are quagga,busybox,wireless-tools and iptables 15:46 < Capey> rxr:ok, i'll convert it. later tonight or early next week 15:47 < Capey> leaving soon for skating 15:49 < rxr> heh - have fun 15:52 -!- sepp [n=sepp@p213.54.13.86.tisdip.tiscali.de] has joined #t2 15:52 < sepp> moin :) 15:52 < rxr> moin sepp 15:53 < sepp> hi rxr 16:07 < sepp> is someone reading the track thingy? 16:08 < sepp> i can not even make a new ticket there ... 16:21 -!- misl [n=chatzill@84-104-172-187.cable.quicknet.nl] has quit [Read error: 110 (Connection timed out)] 16:30 < rxr> sepp: are you logged in? 16:30 < rxr> sepp: we had way too much chinese trac spam 16:31 < rxr> and the trac spam filter has some syntax error in the non log-in case 16:31 < rxr> sorry about that, I just had no time to dig this trac crap right now.... 16:32 < sepp> ahh, ok 16:32 < sepp> np 16:32 -!- misl [n=chatzill@84-104-172-187.cable.quicknet.nl] has joined #t2 16:33 < rxr> DatabaseError: no such table: spamfilter_log 16:33 < rxr> ^- lol 16:34 < rxr> ok - /me searching now 16:34 < rxr> hi misl 16:34 [Users #t2] 16:34 [@ChanServ] [ emte__] [ mtr ] [ rxr ] [ valentin] 16:34 [ Capey ] [ LMJ ] [ nacho_macho2] [ sepp ] 16:34 [ CIA-8 ] [ misl ] [ R4gnar0k ] [ sparc-kly] 16:34 -!- Irssi: #t2: Total of 13 nicks [1 ops, 0 halfops, 0 voices, 12 normal] 16:34 < sepp> yeah, kind of silly error instead of 'you moron need to login 1st' 16:37 < sepp> well, just wanted to post that evas needs [P] > librsvg and ewl > emotion ... and if someone runs a ref build, try to push it back ... 16:39 < sepp> not a complicated task but should be tested 16:41 < rxr> maybe better move librsvg before evas and emotion before ewl? 16:41 < rxr> and leave evas and ewl at their positions ? 16:41 < sepp> emotion needs libxine and gstreamer 16:41 < sepp> and gstreamer half of gnome afaics 16:41 < rxr> ic 16:42 < sepp> and i dont even have gnome and well, right now i dont want to download all that and build all the mess i will never use ... 16:43 < sepp> but if someone runs a refbuild, perfect time to test that ;) 16:49 -!- nacho_macho2 [n=dc36734@213.144.157.75] has quit [Remote closed the connection] 16:50 < sepp> librsvg earlier might work and at least that does not need gconf and all the noise in gnome2/ 16:51 < sepp> well, ugly gnome dep knot :/ 17:02 < rxr> did I mention that I hate trac 17:05 < rxr> sepp: anonymous trac comments work now, again 17:05 < rxr> maybe you wanna test 17:05 < rxr> and/or grab an account there 17:06 < sepp> ok 17:10 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 60 (Operation timed out)] 17:15 < sepp> no more stupid sql errors :) 17:20 < CIA-8> rene * r22720 /trunk/package/security/openssh/openssh.conf: 17:20 < CIA-8> Claudio Leonel and Rene Rebe : 17:20 < CIA-8> * fix openssh cross compilation and installation 17:22 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 17:25 [Users #t2] 17:25 [@ChanServ] [ CIA-8 ] [ LMJ ] [ mtr ] [ rxr ] [ sparc-kly] 17:25 [ Capey ] [ emte__] [ misl] [ R4gnar0k] [ sepp] [ valentin ] 17:25 -!- Irssi: #t2: Total of 12 nicks [1 ops, 0 halfops, 0 voices, 11 normal] 17:28 -!- d-marc [n=d-marc@HSI-KBW-085-216-121-079.hsi.kabelbw.de] has joined #t2 17:41 -!- sepp_ [n=sepp@p213.54.58.134.tisdip.tiscali.de] has joined #t2 17:49 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 17:50 -!- emte__ [n=emte@d64-180-45-14.bchsia.telus.net] has joined #t2 18:07 -!- sepp [n=sepp@p213.54.13.86.tisdip.tiscali.de] has quit [Read error: 110 (Connection timed out)] 18:18 -!- asdfcd [n=dc36734@213.144.157.75] has joined #t2 18:18 -!- asdfcd [n=dc36734@213.144.157.75] has left #t2 ["Konversation terminated!"] 18:18 -!- nacho_macho2 [n=dc36734@213.144.157.75] has joined #t2 18:18 < nacho_macho2> re 18:18 < nacho_macho2> need help again :( 18:19 < nacho_macho2> i have now t2-trunk/build/linuks-7.0-trunk-mini-live-kde-x86-i486/TOOLCHAIN/isofs/live.squash 18:19 < LMJ> hello nacho_macho2 18:19 < nacho_macho2> hi LMJ 18:20 < nacho_macho2> the problem is, some packages had build errors and couldnt be build.. 18:20 < nacho_macho2> how can i rebuild the stuff now? (problems solved9 18:21 < LMJ> what was your previous command ? 18:21 < nacho_macho2> Build-Target 18:21 < LMJ> irrc, just re-run it, it will find packages not compiled and compile them again 18:22 < nacho_macho2> if i try it again, it builds the squashfs image again.. but not the pacakges.. 18:22 < LMJ> you can run a Cleanup before 18:22 < LMJ> hum 18:22 < nacho_macho2> ok didnt no boutCleanup.. 18:22 < rxr> nacho_macho2: you need to remove the .err logs 18:22 < LMJ> ha, i forgot about the .err ;) 18:22 < rxr> LMJ: Cleanup does not remove logs files ... 18:22 < LMJ> you see rxr, better to write this things once for all in a FAQ or Wiki :-p 18:22 < rxr> nacho_macho2: either remove the build/.../var/adm/logs/*.err manually or with the Create-ErrList "frontend" 18:23 < rxr> LMJ: ACK 18:23 < LMJ> :-D 18:23 < rxr> nacho_macho2: I usually rm manually 18:23 < nacho_macho2> ok 18:28 < nacho_macho2> i still get the error building xcb: configure: error: XCB requires xsltproc. 18:28 < nacho_macho2> i ve installed xcltproc and any xslt dev package i have .. 18:32 < nacho_macho2> any advices' 18:32 < nacho_macho2> ? 18:34 < sepp_> mplayer has still problems on non 4:3 displays :/ 18:35 < sepp_> stupid thing 18:36 < rxr> nacho_macho2: libxslt ? 18:36 < rxr> sepp_: hm - I patched it once ... 18:36 < rxr> sepp_: /me can understand neither why they make such a problem out of that 18:37 < sepp_> i know, but it is still not fully working 18:37 < rxr> mplayer# cat x11-monitor-aspect.patch 18:37 < rxr> ouhm :-( 18:37 < nacho_macho2> rxr: yeah installed 1.1 libxlt-dev 18:38 < sepp_> played 2 short videos with -fs, not the 2nd gets the aspect wrong 18:38 < rxr> nacho_macho2: do you have this xsltproc in the build/.../ ? 18:38 < rxr> sepp_: hm 18:38 < rxr> sepp_: only tested playing on 18:38 < rxr> e 18:38 -!- sepp_ is now known as sepp 18:38 < rxr> and that months ago, do not watch much video these days 18:39 < sepp> hehe 18:39 < nacho_macho2> libxslt1-dev is already the newest version. 18:39 < nacho_macho2> libxslt1.1 is already the newest version. 18:44 < nacho_macho2> could pls someone explain what the problem is here: http://paste.debian.net/22629 18:46 < rxr> you mean in your host system? 18:46 < rxr> that does not matter for building in the fresh T2 sandbox ... 18:47 < nacho_macho2> hmm, so my installation system is missing libxslt.. 18:47 < nacho_macho2> i was usin kde light template (without customizing) 18:47 < rxr> ah -ok 18:47 < rxr> let me take a quick look 18:48 < nacho_macho2> and there in packages: packages:O -----5---- 112.350 textproc libxslt 1.1.20 / base/library 0 18:48 < nacho_macho2> i try with it.. 18:48 < sepp> not enabled 18:48 < sepp> should be X -----5----- .... 18:49 < nacho_macho2> yeah 18:49 < nacho_macho2> done that 18:49 < sepp> put "X libxslt" in the pkgsel file 18:50 < nacho_macho2> sure 18:50 < nacho_macho2> i kno that.. 18:50 < sepp> ohh, ok :) 18:50 < nacho_macho2> lurking around here since a few days :) 18:51 < nacho_macho2> now libxml2 is missin.. 18:51 < nacho_macho2> i used the default packages list!! 18:51 < rxr> nacho_macho2: how many build errors do you get ? 18:51 < nacho_macho2> too many :) 18:51 < nacho_macho2> i break them 18:51 < rxr> nacho_macho2: you used a "not used that often" special kde-mini-live flavour 18:51 < rxr> nacho_macho2: more than 20 ? 18:52 < nacho_macho2> yeah 18:52 < nacho_macho2> rxr: even libxml2 is missin in that package temlate.. who creates those lists? 18:52 < rxr> nacho_macho2: you should have ask somewhen in the beginning if this kde-mini-live thing is good idea to start with 18:53 < nacho_macho2> rxr: let me ask it now then.. 18:54 < CIA-8> rene * r22721 /trunk/target/generic/pkgsel/ (10-minimal-xorg.in 50-minimal-desktop.in): 18:54 < CIA-8> * moved libxml and libxslt from 50-minimal-desktop to 10-minimal-xorg 18:54 < CIA-8> (due new xcb) 18:54 < rxr> I only quickly added the kde-mini-live for someone here in IRC 18:54 < rxr> I never built it so far 18:54 < rxr> expect more dragons to linger around on the way .-) 18:54 < nacho_macho2> hehe 18:55 < nacho_macho2> ok.. i hope its only bout the missing deps in packages.. 19:23 * rxr too 19:59 -!- mtr_ [n=Michael@kobz-590cb18c.pool.einsundeins.de] has joined #t2 20:00 < rxr> hi mtr_ 20:15 -!- mtr [n=Michael@kobz-590cab90.pool.einsundeins.de] has quit [Read error: 113 (No route to host)] 20:15 -!- mtr_ is now known as mtr 20:26 -!- sparc-kly_ [n=mubex@adsl-72-50-101-246.prtc.net] has joined #t2 20:29 < nacho_macho2> here some food: 20:29 < nacho_macho2> !> ./configure: line 19618: syntax error near unexpected token `RANDR,' 20:29 < nacho_macho2> !> ./configure: line 19618: `XORG_DRIVER_CHECK_EXT(RANDR, randrproto)' 20:29 < nacho_macho2> !> Due to previous errors, no 5-xf86-video-amd.log file! 20:29 * R4gnar0k munches on it 20:32 < nacho_macho2> and here the xorg mailinglist entry.. http://lists.freedesktop.org/archives/xorg/2006-December/020449.html 20:36 < nacho_macho2> ok solved, i needed to install libdrm-devel 20:42 -!- sparc-kly [n=mubex@adsl-72-50-101-246.prtc.net] has quit [Read error: 110 (Connection timed out)] 20:47 -!- d-marc [n=d-marc@HSI-KBW-085-216-121-079.hsi.kabelbw.de] has quit ["KVIrc 3.2.4 Anomalies http://www.kvirc.net/"] 20:48 -!- sparc-kly_ [n=mubex@adsl-72-50-101-246.prtc.net] has quit [Connection timed out] 21:02 -!- misl [n=chatzill@84-104-172-187.cable.quicknet.nl] has quit ["Chatzilla 0.9.75 [Firefox 1.5.0.9/2006120612]"] 22:50 -!- nacho_macho2 [n=dc36734@213.144.157.75] has quit [Remote closed the connection] 23:37 -!- idealm [n=ideal@203.45.99.98] has joined #t2 23:46 -!- sepp_ [n=sepp@p85.212.18.61.tisdip.tiscali.de] has joined #t2 --- Log closed Mon Feb 26 00:00:21 2007