sjinn: Simple command-line tool to send and receive data on a serial port1

Package available in: [trunk] [8.0]

S-Jinn is a free, lightweight, open-source Linux application written in It is a simple command-line tool designed for sending & receiving data from PC controlled TIA/EIA-232 (RS-232) test, measurement, and control devices. S-Jinn features include the ability to: * Control RS-232 DTR and RTS lines from the command-line * Display DTR, RTS, CTS & DSR status * Send control characters (including the NULL character) * Send values in hex * Specify read length * Set programable delay times for both send & read. * Support for virtaally all baud rates, parity, and data lengths found in standard PC UARTs * Output Formatting: ASCII, hex, ASCII-over-hex, wrap text, truncate lines, supress trailing line feeds

... part of T2, get it here

URL: http://sjinn.sourceforge.net/

Author: Brian Peterson <bpeterso [at] aspenresearch [dot] com>
Author: Aspen Research Corporation <www [dot] aspenresearch [dot] com>
Maintainer: Marian Aldenhoevel <marian [dot] aldenhoevel [at] mba-software [dot] de>

License: GPL
Status: Stable
Version: 1.01

Remark: Does cross compile (as setup and patched in T2).

Download: http://sourceforge.net/projects/project/files/sjinn/sjinn-1.01/Sjinn%201.01/ sjinn-1.01.tar.gz

T2 source: disable-profiling.patch
T2 source: sjinn.cache
T2 source: sjinn.conf
T2 source: sjinn.desc

Build time (on reference hardware): 5% (relative to binutils)2

Installed size (on reference hardware): 0.03 MB, 9 files

Dependencies (build time detected): 00-dirtree bash binutils bzip2 coreutils diffutils findutils gcc glibc grep gzip linux-header make net-tools patch sed sysfiles tar

Installed files (on reference hardware): [show]

1) This page was automatically generated from the T2 package source. Corrections, such as dead links, URL changes or typos need to be performed directly on that source.

2) Compatible with Linux From Scratch's "Standard Build Unit" (SBU).