read-edid: Read and parse monitor EDID.1

Package available in: [trunk]

read-edid is a pair of tools (originally by John Fremlin) for reading the EDID from a monitor. It should work with most monitors made since 1996, assuming the video card supports the standard read commands (most do). read-edid is a set of two tools - get-edid, which gets the raw edid information from the monitor, and parse-edid, which turns the raw binary information into a xorg.conf-compatible monitor section (Modelines also compatible with xrandr).

... part of T2, get it here

URL: http://www.polypux.org/projects/read-edid/

Author: pyrophobicman@gmail.com
Maintainer: The T2 Project <t2 [at] t2-project [dot] org>

License: GPL
Status: Stable
Version: 3.0.1

Download: http://www.polypux.org/projects/read-edid/ read-edid-3.0.1.tar.gz

T2 source: read-edid.cache
T2 source: read-edid.conf
T2 source: read-edid.desc

Build time (on reference hardware): 0% (relative to binutils)2

Installed size (on reference hardware): 0.07 MB, 13 files

Dependencies (build time detected): 00-dirtree bash binutils bzip2 cmake coreutils diffutils findutils gawk gcc glibc grep libx86 linux-header make sed sysfiles tar

Installed files (on reference hardware): [show]

1) This page was automatically generated from the T2 package source. Corrections, such as dead links, URL changes or typos need to be performed directly on that source.

2) Compatible with Linux From Scratch's "Standard Build Unit" (SBU).